Safety Clutch (60HP Capacity) - Fits Various:

NOTE: 1 3/4" x 20 spline Female x 1 3/8" x 6 spline male

NOTE: 200mm Diameter (8")

REMEMBER THIS !
To adjust Standard Duty (Silver or Gold Spring)
BARE-Co PTO clutches:Compress springs fully then back off 2 turnsFine tune so that the clutch slips occasionallyOnce per year release springs completely and allow clutch to slip to polish pressure plateRe-tension Clamp Bolts after 10 Hours Use - then Every 100 Hours 
NOTE:   LOOSE BOLTS = STRIPPED SPLINES

When Fitting Clutch:
Pair of 1/2" dia Clamp Bolts	75 ft lbs
Pair of 5/8 " dia Clamp Bolts	150 ft lbs
Single Cotter Clamp Bolt	100 ft lbs